Eccotemp EL22 Indoor 6.8 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit

*** This bundle includes the Eccotemp EL22i Indoor Natural Gas Tankless Water Heater and the Eccotemp 4" Horizontal Z-Vent Water Heater Vent Kit with Backflow Preventer.***

The Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit will enhance your water heating system. The Eccotemp EL22i tankless water heater and the 4" Horizontal Z-Vent Water Heater Vent Kit with Backflow Preventer are both included in this package, making it an all-in-one solution for all your hot water requirements.

The Eccotemp EL22i Natural Gas Tankless Water Heater is the largest indoor model in the Eccotemp tankless line. It features a stylish front glass enclosure made of tempered black glass, automatic temperature controls, and a touch screen with an LED digital display that shows the output temperature and flow rate in gallons per minute. This tankless water heater can meet the hot water demands of a typical home or apartment with one or two bathrooms as well as modest business applications with a maximum BTU rate of 140,000 and a flow rate of 6.8 gallons per minute.

Natural gas is used to power the Eccotemp EL22i, which is CSA-approved for usage in the US and Canada. It features an activation flow of 0.8 GPM and a 110-volt UL Listed Power Cord, enabling it to deliver hot water immediately. Additionally, this tankless water heater has an energy rating of 82% and an energy factor of 0.80, which guarantees effective operation and lowers your energy costs.

For horizontal installation of the Eccotemp 45HI and EL22i Series indoor water heaters, the bundle kit's included 4" Horizontal Z-Vent Water Heater Vent Kit with Backflow Preventer is composed of premium stainless steel. Everything you require to correctly vent your tankless water heater is included in the kit, ensuring its safe and effective operation.

Enjoy the ease of unlimited hot water on demand by upgrading your water heating system with the Eccotemp EL22i Indoor 6.8 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit.

The Eccotemp EL22i has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.

Please Note: Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!  

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC and TinyHouseEssentials from all liability of lost or stolen packages. 

Features:

• CSA Certified for US and Canadian use
• Hot water capacity range: 0.8 - 6.8 GPM
  
  • 45-degree rise: 6.8 GPM
  • 50-degree rise: 5.0 GPM
  • 70-degree rise: 3.4 GPM
• Comes with Digital Remote with simple controls and diagnostics
  
• Natural Gas-Powered 
• 110-volt UL Listed Power Cord
  
• Activation Flow: 0.8 GPM 
• Maximum Flow Rate: 6.8 GPM 
• Energy Factor: 0.80 
• Energy Rating: 82% 
• Minimum/Maximum Gas Rate: 26,000 - 140,000 BTUs
• 4" Venting Required

Included with your Purchase:

• EL22i Indoor Natural Gas Tankless Water Heater
• Instruction Manual
• Installation Hardware
• Gas Appliance Shut-Off
• Temperature & Pressure-Relief Valve (Included in Canadian shipments only)
• 10 Year Warranty on Heat Exchanger
• 5 Year Warranty on Parts

The 4" Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit includes:

• (1) Termination Hood
• (1) 4" x 90 Degree Elbow
• (1) 4" x 1' Pipe
• (1) Wall Thimble
• (1) 4" Universal Appliance Adapter with Back Flow Preventer

You will need to determine how many additional feet of venting you need and purchase an additional Z-Vent straight pipe. There is a maximum vent run of 20 feet, subtracting 4 feet for every 90 degree elbow in the run. This vent kit does not include a condensation drain pipe. If you need one, they are available for purchase separately.

Specifications:

• Color:  Black
• Flow Rate: 6.8 GPM
• Installation:  Indoor
• Applications:  Whole Home
• Power Type:  Natural Gas (NG)
• Dimensions: 17.75" x 29.50" x 9.50"
• GTIN:  00851293008965
• SKU:  EL22i-NGH

Downloads:

Eccotemp EL22i Users Manual 

Eccotemp EL22i Warranty Information