Looking for a heavy-duty inverter charger that can handle large-sized industrial applications and provide power under heavy load? Look no further than the AIMS Power 6000 Watt Pure Sine Inverter Charger. This powerful inverter charger is perfect for renewable solar, off-grid, business back-up power, mobile, and emergency backup power applications anywhere that uses 100/110/120 volts of alternating current.
With auto frequency detection, this inverter charger can operate at either 50 or 60 hertz, and includes a powerful 60 amp charger that can accept any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.
This 6000 watt low frequency inverter has a 18000 watt surge for 20 seconds and can run at 6000 watts continuously. Plus, it will never completely drain your batteries thanks to its low-voltage shut-down that keeps the voltage at either 20 volts or 21 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power.
The inverter charger also comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.
An optional wired LED or LCD remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite.
The AIMS Power 6000 Watt Pure Sine Inverter Charger is listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2, and includes a battery priority selector, terminal block, marine coating and protection, multi-stage smart charger that can charge GEL, Lead, AGM, and Lithium batteries, and selectable 25W power save mode (hibernation). With 7 battery type settings for the charger and the ability to allow start up and through power with depleted batteries, this inverter charger is the perfect solution for any heavy-duty power application.
Features:
- 6000 watt low frequency inverter
- 18000 watt surge for 20 seconds 300% surge capability
- 24 Volt DC
- Single phase 120Vac output
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- Battery priority selector
- Terminal block
- Marine coated and protected
- Multi stage smart charger 60 Amp charges GEL, Lead, AGM, Lithium
- Remote panel available LED or LCD
- Auto frequency
- 10msec typical transfer time
- Selectable 25W power save mode (hibernation)
- 7 battery type settings for charger
- Allows start up and through power with depleted batteries
Specifications:
Charger Output Specifications:- Continuous output power: 6000 Watts
- Surge rating: 18000 Watts (20 Seconds)
- Output waveform: Pure Sine/Same as input (Bypass Mode)
- Output voltage 100-110-120Vac
- Output breaker: 80 Amps
- Nominal efficiency: >88% (Peak)
- Line mode efficiency: >95%
- Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical transfer time: 10ms (Max)
- THD: < 10% DC
- Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)
- Nominal input voltage: 24.0Vdc
- Minimum start voltage: 20.0Vdc
- Low battery alarm: 21.0Vdc-22.0Vdc
- Low battery trip: 20.0Vdc-21.0Vdc
- High voltage alarm: 32.0Vdc
- Low battery voltage restart: 26.6Vdc
- Idle consumption: 52.5 watts
- Idle consumption with power saver mode ON: <25 watts
- Output voltage: depends on battery Type
- Charger rate: 60A
- Over charge protection shutdown 31.4V
- Selectable charge setting based on battery type
- Adjustable charge current: off-15%-100%
- Four stage smart charger
- 80 amp automatic transfer switch
- 10 ms (max)
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- 2 Year warranty
- Unit Weight: 108 lb.
- Unit Size L x W x H: 19 x 16.5 x 8 inches
- Shipping Weight: 113 lb
- Shipping L x W x H 30.5 x 14.25 x 13.75 inches
Downloads:
Description
Looking for a heavy-duty inverter charger that can handle large-sized industrial applications and provide power under heavy load? Look no further than the AIMS Power 6000 Watt Pure Sine Inverter Charger. This powerful inverter charger is perfect for renewable solar, off-grid, business back-up power, mobile, and emergency backup power applications anywhere that uses 100/110/120 volts of alternating current.
With auto frequency detection, this inverter charger can operate at either 50 or 60 hertz, and includes a powerful 60 amp charger that can accept any source of 120v AC power to charge batteries, including a gas or diesel generator or shore power at an RV park/truck stop. It will even accept power from an extension cord plugged into your wall outlet at home.
This 6000 watt low frequency inverter has a 18000 watt surge for 20 seconds and can run at 6000 watts continuously. Plus, it will never completely drain your batteries thanks to its low-voltage shut-down that keeps the voltage at either 20 volts or 21 volts depending on your selection. With the battery priority mode, you can set your inverter to run directly off of a battery back-up system instead of a generator or tertiary source of AC Power.
The inverter charger also comes with a power saver mode that pulses every 30 seconds, attempting to detect a necessary load of 25 watts or more before it will turn on. Otherwise, the inverter will “sleep” and draw right around a half an amp per hour, saving you precious reserve power in your batteries until you need it.
An optional wired LED or LCD remote can be added for fast and easy operation if your inverter charger is mounted in a location that is inconvenient to get at. This allows the unit to be operated within the cab of a vehicle or from another location in the home or campsite.
The AIMS Power 6000 Watt Pure Sine Inverter Charger is listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2, and includes a battery priority selector, terminal block, marine coating and protection, multi-stage smart charger that can charge GEL, Lead, AGM, and Lithium batteries, and selectable 25W power save mode (hibernation). With 7 battery type settings for the charger and the ability to allow start up and through power with depleted batteries, this inverter charger is the perfect solution for any heavy-duty power application.
Features:
- 6000 watt low frequency inverter
- 18000 watt surge for 20 seconds 300% surge capability
- 24 Volt DC
- Single phase 120Vac output
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- Battery priority selector
- Terminal block
- Marine coated and protected
- Multi stage smart charger 60 Amp charges GEL, Lead, AGM, Lithium
- Remote panel available LED or LCD
- Auto frequency
- 10msec typical transfer time
- Selectable 25W power save mode (hibernation)
- 7 battery type settings for charger
- Allows start up and through power with depleted batteries
Specifications:
Charger Output Specifications:- Continuous output power: 6000 Watts
- Surge rating: 18000 Watts (20 Seconds)
- Output waveform: Pure Sine/Same as input (Bypass Mode)
- Output voltage 100-110-120Vac
- Output breaker: 80 Amps
- Nominal efficiency: >88% (Peak)
- Line mode efficiency: >95%
- Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical transfer time: 10ms (Max)
- THD: < 10% DC
- Ambient operating temperature: 14°F to 122°F (-10°C to 50°C)
- Nominal input voltage: 24.0Vdc
- Minimum start voltage: 20.0Vdc
- Low battery alarm: 21.0Vdc-22.0Vdc
- Low battery trip: 20.0Vdc-21.0Vdc
- High voltage alarm: 32.0Vdc
- Low battery voltage restart: 26.6Vdc
- Idle consumption: 52.5 watts
- Idle consumption with power saver mode ON: <25 watts
- Output voltage: depends on battery Type
- Charger rate: 60A
- Over charge protection shutdown 31.4V
- Selectable charge setting based on battery type
- Adjustable charge current: off-15%-100%
- Four stage smart charger
- 80 amp automatic transfer switch
- 10 ms (max)
- Listed to UL 458, 1741, 1012 and CSA 22.2 NO. 107.1 & 107.2
- 2 Year warranty
- Unit Weight: 108 lb.
- Unit Size L x W x H: 19 x 16.5 x 8 inches
- Shipping Weight: 113 lb
- Shipping L x W x H 30.5 x 14.25 x 13.75 inches
Downloads:
Reviews
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Choose your Installation Kit Size Here
Installation Kit Size
Air Handler & Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Choose your Installation Kit Size Here
Installation Kit Size
Air Handler & Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Choose your Installation Kit Size Here
Installation Kit Size
Air Handler & Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Questions & Answers
Have a Question?
Be the first to ask a question about this.