AIMS Power AC Converter / Battery Charger 12V & 24V Smart Charger 75 Amps - Listed to UL 458/CSA

Looking for a versatile and high-capacity AC converter/battery charger? Look no further than the AIMS Power AC Converter/Battery Charger. With a wide range of AC inputs and the ability to handle a variety of battery technologies, this charger is perfect for RVs, boats, and other demanding applications.

Boasting a 75-amp charging capacity, the AIMS Power AC Converter/Battery Charger can charge a 100 amp-hour battery up to 90% in less than an hour. And with its three-stage smart charging system and variable charging voltage algorithm, you can be sure that your batteries are receiving the optimal charge for their specific needs.

But that's not all. The AIMS Power AC Converter/Battery Charger is also designed with safety in mind, featuring reverse polarity, over-voltage, under-voltage, short-circuit, and over-temperature protections. And with its high AC to DC converting efficiency of over 80%, you can be sure that your batteries are being charged as efficiently as possible.

So if you're looking for a powerful and reliable AC converter/battery charger that can handle all your charging needs, look no further than the AIMS Power AC Converter/Battery Charger. With its wide range of features and two-year manufacturer's warranty, it's the perfect choice for any demanding application.

Features:

• Large charging capacity design (75 Amp for 12Vdc; 37.5 Amp for 24Vdc) charges a 100 amp hour battery in under an hour up to 90% charge
• Power supply up to 75 amps at 12Vdc or 37.5 amps at 24Vdc
• Three stage smart charger with variable charging voltage algorithm for maximizing  battery life (bulk, absorb and float)
• 4 pre-programmed charging algorithms using the dip switches for the most common charging profiles
• Charges lead acid, AGM, GEL and LiFPO4 batteries
• Adjustable charge current control dial to safely charge smaller battery (s)
• Wide input voltage range, 70Vac to 145Vac for unstable inputs
• Reverse polarity, over voltage, under voltage, short circuit, over temperature  protections
• High AC to DC converting efficiency design  >80%
• Thermal and load based cooling fan
• Includes battery temperature sensor port to help maintain the life of the battery(s) (battery temperature sensor not included)
• AC input cord – 4ft
• Listed to UL 458 and CSA 22.2 NO. 107.1
• 2 Year warranty

 Specifications:

•      96-145VAC full performance 
•      70-96VAC automatically de-rate to 50% of full load current
• Frequency:  40Hz to 70Hz
• Nominal Input Current at Rated Output: <9Aac
• Voltage Measurement Accuracy: ±8Vac
• Frequency Measurement Accuracy: ±1Hz

• Nominal Voltage:  12/24Vdc auto adjusting
• Output Current:
•      Input voltage: 96-145V
•      Output current: 75A for 12V mode
•      Output current: 37.5A for 24V mode
• Rated Output Current:  Auto adjust to 12V/24V
• Current Accuracy: ± 6% of full rated output current @25°C, for target currents across the range from 10% rated output (for absorption exit criteria accuracy) to the current limit set-point.
• Load Regulation: 1.5%
• Current Limit:  75-80Amp
• Dead-Battery Charging:
•      8-14.9Vdc at 100% of rated output current
•      8-29.8Vdc at 100% of rated output current
• Selectable Battery Type: Open Lead-Acid, Gel, AGM, LiFePo4, adjustable
• Parallel Outputs:  Maximum of two AC converter units connected in parallel
• Efficiency: 80%

• Input Over Voltage: Unit is safe for input voltage up to 150VacRMS (and up to 215Vpeak). Above this level the damage may occur.
• Reverse Battery Polarity Protection: Non-destructive reverse battery polarity protection with fuses. Permanent damage will not occur and perform after fuse replacement.
• Input Under-voltage: No permanent damage for input voltages from 0-300Vac. Shutdown or input current limit or other means may be applied when input voltage is out of normal operating range.
• Output over voltage 12/24V mode:  
•       12Vdc: Unit will shut down if Vcharging > Vcharging (target) + 1.0Vdc for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds, for battery OVP the unit will restart in the same stage.
•       24Vdc: Unit will shut down if Vcharging > Vcharging (target) + 1.5Vdc for more than 2 seconds; unit will restart when voltage <= Vcharging (target) for more than 2 seconds, for battery OVP the unit will restart in the same stage.
• Charger over temperature protection: The internal temperatures of the charger will be measured by NTC. Based on these measurements, unit will shut down if the temperature exceeds 105°C. Unit will restart when environment temperature cools to 95 °C.
• BTS(Battery Temperature Sensing):  The battery temperature sensor allows the charge controller to continuously adjust charge voltage / charge current based on actual battery temperature. When the battery temperature is over 40 °C, unit will reduce the charging voltage to Float voltage, also it will reduce the Max charging current by 10% with every two degree of temperature rise. When the battery temperature is over 50 °C, unit will shut down.

• Operation temperature: 
•      Nominal ambient temperature: 25°C
•      Operating Ambient Temperature range: -10°C to 40°C
•      (On the heat sink of DC-DC part, if the temperature is over 90 ℃, the Charger Current will be de-rate to 50% ; if the temperature is over 105 ℃, the Unit will be shut down.)
• Relative humidity: 5～95% without condensation
• Noise:  Unit requirements: below 50dB (A) measured at 1 m distance with fan full working.
• Storage Conditions Temperature:  -20°C to +80°C
• Cooling System: Vented body with continuous fan to keep unit cool
• Safety Certifications:  UL458，CSA22.2#107.1

• Dimensions(D x W x H)mm: 10.25” * 6.75” * 3.25”
• Unit Weight: 6.5 lb
• Boxed Weight:  7 lb

Downloads: