Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Liquid Propane Tankless Water Heater Horizontal Bundle Kit

***This bundle includes the FVI12-LP Tankless Water Heater, 2.5" to 3" Stainless Steel Adapter, and the 3" Horizontal Vent Kit.***

Looking for a tankless water heater that's efficient and easy to install? Look no further than the Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Liquid Propane Tankless Water Heater Horizontal Bundle Kit.

This advanced indoor model from Eccotemp's tankless line is rated at 4.0 GPM with a temperature rise of 38 degrees and 74,500 BTU per hour, making it ideal for smaller single-family homes, apartments, condos, or cabins. The included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze, and additional venting may be required based on your installation.

With Eccotemp's advanced 0.7 GPM low flow ignition technology, you'll enjoy endless hot water without experiencing cold spots. Manual temperature controls allow the temperature to be set and regulated at the front control panel, rather than at your sink or shower.

This compact, wall-mounted unit has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display, and PCB. Rated for 1-2 applications used simultaneously, taking a shower and running a sink at the same time is effortless.

The Eccotemp FVI12-LP is ideal for hot water heating applications in a smaller residential single-family home, condo, cabin, or apartment. The limited manufacturer warranty (Heat Exchanger: 5 Years, Parts: 2 Years), live chat, appointments for product support, and self-help guides provide peace of mind that the Eccotemp FVI12 will keep you in hot water for years.

What's Included in the bundle? The FVI12-LP tankless water heater, 3” horizontal vent kit, gas appliance shut off valve, mounting hardware, wall thimble, 15” termination pipe, and installation manual. The 3” Horizontal Vent Kit includes a termination hood with backflow preventer, 12” straight pipe, 90-degree elbow, wall thimble, and appliance adapter.

To ensure the longevity of the Eccotemp FVI12, it's recommended to clean it every six months with Eccotemp's patented, one-of-a-kind EZ-FLUSH Descaling Kit to remove all water scale build-up.

Please note that this product is not CSA certified. Upgrade to the Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Liquid Propane Tankless Water Heater Horizontal Bundle Kit and enjoy endless hot water without any hassle!

The Eccotemp FVI12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp FVI12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp FVI12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING nor be used with a bilge pump.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!

Features:

• Frustration Free Packaging
• Digital thermostat and temperature display
• Manual water-temperature controls
• Stainless steel horizontal vent kit included
• Uses gas only when hot water is activated
• 30-80 psi water pressure
• 25,000-74,500 BTU
• For indoor installation with safe, efficient power ventilation
• Precise temperature and water-flow adjustment
• It pulls only 2 watts and 1.07 amps during operation
• 77 degrees F rise at 2.3 GPM (gallons per minute)
• 4.0 GPM flow capacity

Included with your Purchase:

• (1) Liquid Propane Tankless Water Heater
• (1) 2 1/2" 90-degree Elbow with Backflow Preventer
• (1) Wall thimble
• (1) 2 1/2" x 20" Termination Pipe
• (1) 110 volt UL listed power cord
• (1) Hardware Pack
• (1) Instruction Manual
• (1) 2-Year Limited Warranty

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp FVI12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Vent Kit 3"

This 3" single walled Horizontal, Stainless Steel Z-Vent, Wall Hung, Water Heater Vent Kit for Eccotemp 40HI-LP and 40HI-NG (indoor) models  is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

• (1) Termination Hood with Backflow Preventer
• (1) 3" x 90 Degree Elbow
• (1) 3" x 1' Pipe
• (1) 3" Wall Thimble
• (1) 3" Paloma Appliance Adapter

Made of AL-294C stainless steel.  This is Category II/III and UL approved.

Specifications:

• Map Zone: Southern Region, Northern Region, Mid Region
• Color:  White
• Flow Rate: 4.0 GPM
• Installation:  Indoor
• Applications:  Apartment/Condo/Townhome, Cabin, Tiny Home, Mid-Size Home
• Power Type:  Liquid Propane (LP)
• Dimensions: 17.00" x 39.00" x 11.00"
• GTIN:  00891876002522
• SKU:  FVI12-LPH

Downloads: