Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit

***This bundle includes the FVI12-NG Tankless water heater, 2.5" to 3" Stainless steel adapter, and the 3" horizontal vent kit.***

Introducing the Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit! This powerful and efficient tankless water heater is perfect for smaller single-family homes, apartments, condos, or cabins. With a rating of 4.0 GPM and 74,500 BTU per hour, the Eccotemp FVI12-NG can meet all your hot-water needs!

The included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit makes installation easy and hassle-free. The kit comes complete with a termination hood with backflow preventer, 90-degree elbow, 12” straight pipe, wall thimble, and appliance adapter. Additional venting may be required based on your installation.

Eccotemp’s advanced 0.7 GPM low flow ignition technology ensures that users can enjoy endless hot water without experiencing cold spots. The manual temperature controls allow you to set and regulate the temperature at the front control panel, instead of at your sink or shower.

The compact, wall-mounted Eccotemp FVI12-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display, and PCB. Rated for 1-2 applications used simultaneously, taking a shower and running a sink at the same time is effortless. The upgraded PCB (Product Control Board) performance and all-new gas modulating valve provide best-in-class temperature performance at a price anyone can afford.

This ultra-efficient tankless water heater is ideal for just about every single-family home, with a rating of 4.0 GPM at 74,500 BTUs and a temperature rise of 38 degrees. The Eccotemp FVI12-NG comes with a Limited Manufacturer Warranty of 5 years for the Heat Exchanger and 2 years for Parts, along with live chat, appointments for product support, and self-help guides to give you peace of mind that it will keep you in hot water for years.

The Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit includes the FVI12-NG tankless water heater, 3” horizontal vent kit, gas appliance shut off valve, mounting hardware, wall thimble, 15” termination pipe, and installation manual. The 3” Horizontal Vent Kit comes with a termination hood with backflow preventer, 12” straight pipe, 90-degree elbow, wall thimble, and appliance adapter.

To ensure the longevity of the Eccotemp FVI12, we recommend cleaning it every six months with Eccotemp's patented, one-of-a-kind EZ-FLUSH Descaling Kit to remove all water scale build-up. Please note that the Eccotemp FVI12 is not CSA certified.

Experience the convenience and efficiency of the Eccotemp FVI12 Forced Vent Indoor 4.0 GPM Natural Gas Tankless Water Heater Horizontal Vent Bundle Kit in your home today!

The Eccotemp FVI12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp FVI12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp FVI12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING nor be used with a bilge pump.

Please Note: Failure to clean and descale your water heater quarterly can result in Lime and sediment build up within the heater, which can void your warranty! We recommend using our Eccotemp EZ-Flush System Descaler Kit to ensure a clean, energy efficient, long lasting heater!

All Whole Home Water Heater purchases will be shipped with SIGNATURE REQUIRED. If you wish to remove SIGNATURE REQUIRED from your shipment please contact Customer Service immediately to have it removed. Please Note: By opting out of SIGNATURE REQUIRED you release Eccotemp Systems, LLC and TinyHouseEssentials from all liability of lost or stolen packages.

Features:

• Frustration Free Packaging
• Digital thermostat and temperature display
• Manual water-temperature controls
• Stainless steel horizontal vent kit included
• Uses gas only when hot water is activated
• 30-80 psi water pressure
• 25,000-74,500 BTU
• For indoor installation with safe, efficient power ventilation
• Precise temperature and water-flow adjustment
• It pulls only 2 watts and 1.07 amps during operation
• 77 degrees F rise at 2.3 GPM (gallons per minute)
• 4.0 GPM flow capacity

Included with your Purchase:

• (1) Natural Gas Tankless Water Heater
• (1) 2 1/2" 90-degree Elbow with Backflow Preventer
• (1) Wall thimble
• (1) 2 1/2" x 20" Termination Pipe
• (1) 110 volt UL listed power cord
• (1) Hardware Pack
• (1) Instruction Manual
• (1) 2-Year Limited Warranty

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp FVI12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Ventilation kit 3"

This 3" single walled Horizontal Stainless Steel Z-Vent Wall Hung Water Heater Vent Kit.  This vent kit is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

• (1) Termination Hood with Backflow Preventer
• (1) 3" x 90 Degree Elbow
• (1) 3" x 1' Pipe
• (1) 3" Wall Thimble
• (1) 3" Paloma Appliance Adapter

Made of AL-294C stainless steel.  This is Category II/III and UL approved. 

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Specifications:

• Map Zone: Southern Region, Northern Region, Mid Region
• Color:  White
• Flow Rate: 4.0 GPM
• Installation:  Indoor
• Applications:  Apartment/Condo/Townhome, Cabin, Tiny Home, Mid-Size Home
• Power Type:  Natural Gas (NG)
• Dimensions: 17.00" x 39.00" x 11.00"
• GTIN:  00891876002546
• SKU:  FVI12-NGH

Downloads: