Eccotemp i12 Indoor 4.0 GPM Liquid Propane Tankless Water Heater Horizontal Vent Bundle Kit

***This bundle includes the i12-LP Tankless Water Heater, 2.5" to 3" Stainless steel adapter, and the 3" Horizontal Vent Kit. ***

Introducing the Eccotemp i12 Indoor 4.0 GPM Liquid Propane Tankless Water Heater Horizontal Vent Bundle Kit - the perfect solution for endless hot water and energy efficiency in smaller residential and light commercial applications.

Equipped with advanced low flow ignition technology, the i12-LP provides an impressive 4.0 GPM flow rate with a temperature rise of 38 degrees and 80,000 BTU per hour. With its upgraded PCB performance and all-new gas modulating valve, this tankless water heater delivers best-in-class temperature performance at an affordable price.

Installation is made easy with the included Eccotemp 3” category III, stainless steel, UL listed Horizontal Vent Kit. Additional venting may be required based on your installation, but the kit includes a termination hood with backflow preventer, 90-degree elbow, 12” straight pipe, wall thimble, and appliance adapter.

The Eccotemp i12-LP is compact, wall-mounted, and has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Digital Display, and PCB. Its fully automated control system allows for low energy consumption and efficiency, pulling only about 0.5 amps during operation.

This tankless water heater is perfect for smaller sized single-family homes, apartments, condos, cabins, and light commercial applications, and can easily handle 1-2 hot water applications simultaneously. With advanced incoming and outgoing water temperature sensor technology, you can always have total confidence when it comes to safety.

The Eccotemp i12-LP comes with a limited manufacturer warranty (Heat Exchanger: 5 Years, Parts: 2 Years, Free Accessories - fittings, accessories, hardware pack, etc.: 30 days), live chat, appointments for product support, and self-help guides to give you peace of mind that it will keep you in hot water for years.

In addition to the tankless water heater and vent kit, this bundle includes a gas appliance shut off valve, 15” termination pipe, mounting hardware, and installation manual. Plus, the Eccotemp i12 can be complemented with our patented one of a kind EZ-Flush descaling kit to ensure your tankless water heater is running at maximum efficiency all year long.

Please note that the Eccotemp i12 is not CSA certified. Experience the ultimate in energy efficiency and endless hot water with the Eccotemp i12 Indoor Liquid Propane Tankless Water Heater Horizontal Vent Bundle Kit.

The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING. 

Please Note: Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! We recommend using the Eccotemp EZ-Flush System De-scaler Kit to ensure a clean, energy efficient, long lasting heater.  

Features:

• Activates only on demand and no pilot light needed, reducing energy consumption
• Easy to use LED display controls
• Safe electronic ignition system
• Uses standard 1/2" NPT water fittings
• 4 GPM flow capacity
• Energy factor: 79%
• Hot water capacity range: 0.6 - 4.8 GPM
• Maximum/Minimum gas rate: 25,000 - 80,000 BTUs

Included with your Purchase:

• Liquid Propane Tankless Water Heater
• 3/4" Webstone Service Valve Kit (Threaded)
• 2 1/2" 90-Degree Elbow with Backflow Preventer
• Wall Thimble
• 2 1/2" x 20" Termination Pipe
• 120-volt UL Listed Power Cord
• Hardware Pack
• Instruction Manual
• 2-year manufacturer warranty

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Horizontal Vent Kit 3"

The 3" single walled, Horizontal, Stainless Steel, Z-Vent, Wall Hung, Water Heater Vent Kit for Eccotemp 40HI-LP and 40HI-NG (indoor) models is supplied with all the necessary components for a quick and seamless installation.  It includes the following pieces:

• (1) 3" x 90 Degree Elbow
• (1) 3" x 1' Pipe
• (1) 3" Wall Thimble
• (1) 3" Paloma Appliance Adapter
• (1) Termination Hood with Backflow Preventer

Made of AL-294C stainless steel.  This is Category II/III and UL approved.

Specifications:

• Map Zone: Southern Region, Northern Region, Mid Region
• Color:  Black
• Flow Rate: 4.0 GPM
• Installation:  Indoor
• Applications:  Apartment/Condo/Townhome, Cabin, Tiny Home
• Power Type:  Liquid Propane (LP)
• Dimensions: 15.70" x 27.50" x 10.90"
• GTIN:  00891876002775
• SKU:  i12-LPH

Downloads: