Eccotemp i12 Indoor 4.0 GPM Liquid Propane Tankless Water Heater Vertical Vent Bundle Kit

***This bundle includes the i12-LP Tankless Water Heater, 2.5" to 3" Stainless steel adapter, and the 3" Vertical Vent Kit.***

Introducing the Eccotemp i12 Indoor 4.0 GPM Liquid Propane Tankless Water Heater Vertical Vent Bundle Kit – the ultimate solution to your hot water needs! This advanced tankless water heater is designed to provide endless hot water without cold spots, making it ideal for smaller single-family homes, apartments, condos, and cabins, as well as small commercial applications.

With a rating of 4.0 GPM at 80,000 BTUs and a temperature rise of 38 degrees, this ultra-efficient tankless water heater is perfect for just about every single-family home. It also features advanced Generation 3 computer board with high-performance processing and smart adjust technology built in, meeting and exceeding today's consumer demands.

The Eccotemp i12-LP is easy to install with the included Eccotemp 3” Category III, Stainless Steel, UL-Listed Vertical Vent Kit. This kit includes an adjustable flashing of 0–30 degrees, a storm collar, a rain cap with a wind band, a backflow preventer, a universal appliance adapter, and an in-line drain pipe. Please note that additional venting may be required based on your installation.

The compact, wall-mounted design of the Eccotemp i12-LP makes it easy to install and ideal for low energy consumption and efficiency. It has a 110/120-volt UL-listed power cord that powers the internal exhaust fan, digital display, and PCB. With its fully automated control system, the Eccotemp i12-LP only pulls about.5 amps during operation.

This tankless water heater is also equipped with advanced incoming and outgoing water temperature sensor technology, ensuring total confidence when it comes to safety. Plus, the limited manufacturer warranty (Heat Exchanger: 5 Years, Parts: 2 Years, Free Accessories - fittings, accessories, hardware pack, etc.: 30 days), live chat, appointments for product support, self-help guides, and patented EZ-Flush descaling kit give you peace of mind that the Eccotemp i12 will keep you in hot water for years.

In summary, the Eccotemp i12-LP tankless water heater is the perfect solution for your hot water needs. It's efficient, easy to install, and comes with advanced technology and safety features. Plus, with the included vertical vent kit, you'll have everything you need to get started. Don't settle for cold showers – get the Eccotemp i12 today!

The Eccotemp i12 has been tested for use at elevations up to 2000 feet. Installation and use of the Eccotemp i12 above 2000 feet may effect overall product efficiency and performance. Installation and use of the Eccotemp i12 above 5000 feet is not recommended.

IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEM, RECIRCULATING, or FLOOR HEATING. 

Please Note: Failure to clean and descale your water heater quarterly can result in lime and sediment build up within the heater, which can void your warranty! We recommend using the Eccotemp EZ-Flush System De-scaler Kit to ensure a clean, energy efficient, long lasting heater.  

Features:

• Activates only on demand and no pilot light needed, reducing energy consumption
• Easy to use LED display controls
• Safe electronic ignition system
• Uses standard 1/2" NPT water fittings
• 4 GPM flow capacity
• Energy factor: 79%
• Hot water capacity range: 0.6 - 4.8 GPM
• Maximum/Minimum gas rate: 25,000 - 80,000 BTUs

Included with your Purchase:

• Liquid Propane Tankless Water Heater
• 3/4" Webstone Service Valve Kit (Threaded)
• 2 1/2" 90-Degree Elbow with Backflow Preventer
• Wall Thimble
• 2 1/2" x 20" Termination Pipe
• 120-volt UL Listed Power Cord
• Hardware Pack
• Instruction Manual
• 2-year manufacturer warranty

2.5 to 3" Stainless steel adapter

This stainless steel adapter can be used with the Eccotemp i12 series taking it from a 2.5" to a standard 3" vent system. Total length is 6". Note, you may need to purchase a straight pipe piece with a backflow preventer to ensure that freezing air does not come back through the vent pipe.

Eccotemp Vertical Ventilation kit 3"

This 3" single walled Z-Flex Vertical Vent Kit is for vertical installations only. You will need to purchase an additional Z-Vent straight pipe. You will need to determine how many additional feet as well as need a condensation drain. Also, remember a max vent run of 20’ subtracting 4’ for every 90-degree elbow in the run.

Includes:

• 1 x 3" Rain cap
• 1 x 3" Top support/Storm collar
• 1 x 3" Adjustable Roof Flashing (specify either normal or steep flashing)
• 1 x 3" Paloma Appliance Adapter
• 1 x 3" Backflow Preventer 

Z-Vent special gas vent kits are all made of AL-294C stainless steel and are category II/III and UL compliant.

Specifications:

• Map Zone: Southern Region, Northern Region, Mid Region
• Color:  Black
• Flow Rate: 4.0 GPM
• Installation:  Indoor
• Applications:  Apartment/Condo/Townhome, Cabin, Tiny Home
• Power Type:  Liquid Propane (LP)
• Dimensions: 15.70" x 27.50" x 10.90"
• GTIN:  00891876002799
• SKU:  i12-LPV

Downloads: