AIMS Power 3840 Watt Off-Grid Solar Kit with 8000 Watt Pure Sine Power Inverter Charger 120/240VAC 48VDC

Looking for a reliable and efficient off-grid solar kit to power your tiny home, cabin, or small business? The AIMS Power 3840 Watt Off-Grid Solar Kit with 8000 Watt Pure Sine Inverter Charger is the perfect all-in-one solution for your power needs. This solar kit includes all the necessary components required and bundled for your convenience, making it easy to connect and use.

This 3840 watt solar kit is most effective when used to power medium-sized appliances, electronics, tools, and pumps. The 8000 Watt Pure Sine Inverter is built-in with a charger, allowing you to hook up to shore power or a gas generator when you need extra power. The kit can work with devices up to 6000 watts/66.67 AC amps 120 VAC, making it ideal for any equipment that needs off-grid or backup power.

The panels are covered in tempered glass to protect against the elements, and the PV wiring is protected against UV, water, ozone, oils, grains, and weather-resistant. Each system comes with a wiring diagram upon purchase to guide you in your setup. With the AIMS Power 3840 Watt Off-Grid Solar Kit, you can enjoy a reliable and eco-friendly power source for your home, cabin, or small business.

This solar kit is perfect for a small to medium-sized home, cabin, or business and switches back and forth between grid/generator and solar power. The solar panel array can recharge a 50% depleted battery bank in under 4 hours with full sunlight. Start your off-grid journey with AIMS Power today and enjoy the freedom and peace of mind that comes with a reliable and efficient power source.

Features:

• Simple to connect and Easy to use
• Works with devices up to 6000 watts/  66.67 AC amps 120 VAC
• Ideal for any equipment that needs off grid or back up power
• Perfect for a small to medium sized home, cabin or business. Switches back and forth between grid/generator and solar power

*The solar panel array will recharge a 50% depleted battery bank  in under 4 hours with full sunlight.*

Included with your Kit:

• PV330MONO: 330W Solar Panel Monocrystalline (x12)
• PVEXT20FT10AWG: 20 Ft 10 AWG PV Male to Female Extension -Extension cables connect from the panel array to the combiner box(x8)
• COM6IN-120AO: Combiner Box 6 String (x1)
• PVEXT100FT10AWG: PV Male and Female Cable - Runs the cables from the combiner box to the disconnect switch(x2)
• DC1600V32A2IO: Quick Disconnect Switch - Used to quickly cut power(x1)
• PVF20FT10AWG: 20 Ft 10 AWG PV Female Cable - Used to connect the disconnect switch to the solar charge controller(x1)
• PVM20FT10AWG: 20 Ft 10 AWG PV Male Cable - Used to connect the disconnect switch to the solar charge controller(x1)
• SCC80AMPPT: Solar Charge Controller MPPT 80A, 12/24/36/48V(x1)
• CBL08FT6AWGC: 6 AWG Red + Black Set Lug-Cut Charge Controller Cable 8 Ft - Connects the solar charge controller to the battery(set x1)
• ANL100KIT: ANL 100 Amp Fuse + Holder Kit + 6AWG Jumper - Place between the solar charge controller and the battery as a safety feature(kit x1)
• AGM12V200A: Sealed AGM Battery 200Ahr 12Vdc (x12)
• CBL01FT1/0RED: 1/0 Red Only Battery Bank Cable 1 ft - 9x for the series connection for the battery bank and 1x for the fuse kit jumper cable(x10)
• CBL02FT1/0: 1/0 AWG Red + Black Set Battery Bank Cable 2 ft - Runs the parallel connections for battery bank(set x2)
• ANL300KIT: ANL 300 Amp Fuse + Holder Kit - Place between the inverter and the battery as a safety feature(kit x1)
• CBL08FT1/0: 1/0 AWG Red + Black Set Power Inverter Cable 8 ft - Connects the battery bank to the inverter(set x1)
• PICGLFBATS: Low Frequency Battery Sensor - Tape to the negative side of the battery near the post and plug into the inverter(x1)
• PICOGLF80W48V240VS: 8000W Pure Sine Power Inverter Charger w/transfer switch 24Vdc, 240Vac Split Phase ETL/CSA Listed(x1)