Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit

Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit

$619.99 $749.99

You Save: $130.00 18%

.. people are viewing this, and 3 recently purchased it

Fast Free Shipping on orders over $100
Lowest Price Guarantee
No Sales Tax Outside CA & WY!
Today Only - Spend $250 and get $20 off! Type KEEPITSIMPLE in checkout!

Looking for a reliable and efficient way to harness the power of the sun? Look no further than the Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit.

This kit is designed to help you get started with solar power quickly and easily, and includes everything you need to start generating clean energy right away. The kit includes four 100 watt monocrystalline solar panels, a 30 amp PWM charge controller, a 20-foot MC4 adaptor kit, and a 8-foot tray cable, as well as mounting hardware and a manual.

The monocrystalline solar panels are highly efficient, with a module efficiency of up to 21%, and are able to withstand high winds (2400Pa) and snow loads (5400Pa). The 30 amp PWM charge controller allows you to charge your 12 volt batteries safely and efficiently, and the 20-foot MC4 adaptor kit makes it easy to connect your panels to your charge controller.

With the Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit, you'll be able to power all kinds of devices and appliances, from lights and fans to TVs and refrigerators. And because it's completely solar-powered, you'll be able to enjoy all of these benefits without having to worry about the cost or environmental impact of traditional energy sources.

So why wait? Start harnessing the power of the sun today with the Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit.

Features:

Efficient Performance:

The bypass diode can ensure the panel has an excellent performance in a low-light environment and the TPT back sheet dissipates excess heat to ensure smooth output performance. The Cell Efficiency can reach 22%.

Smart 4-stage Charging:

The Wanderer PWM charge controller features advanced 4-stage charging (bulk, boost, float, and equalization) to ensure your battery is efficiently and safely charged to 100%.

Powerful Compatibility:

The Wanderer PWM Charge Controller is compatible with four different types of batteries: Sealed, Gel, Flooded, and Lithium batteries. Connecting the BT-1 Bluetooth module to the RS232 communication port, you can monitor the system status in real-time through the DC Home app.

Please note the BT1 Bluetooth Module is not included.

Solid Quality:

The corrosion-resistant aluminum frame with strong corner braces is designed for long-term outdoor use, giving the panels a long service life.

No Fear of Weather Challenge:

The IP65 Junction Box protects against environmental particles and low-pressure water jets. These IP67 waterproof solar connectors ensure that the water and dust will not enter the connector during extended outdoor use. Effectively preventing water from seeping in.

Ready to Install:

This Renogy Solar Kit includes the equipment necessary for building a new system. The necessary cables, Z-brackets, Solar Y Branch Connectors and pre-drilled holes on the back frame of the panel allow fast and secure mounting.

Included in your Solar Kit:

4X 100 Watt Mono Solar Panels
3X Renogy Solar Y Branch Connectors
4X Mounting Z-Brackets
Renogy 20Ft 10AWG Solar Adaptor Kit (one pair)
Renogy 8Ft 10AWG Tray Cables (one pair)
Renogy Wanderer Li 30A PWM Charge Controller

Specifications:

Renogy 100W Monocrystalline Solar Panel:

Maximum Power: 100W
Maximum System Voltage: 600V DC
Open-Circuit Voltage (Voc): 21.6V
Short-Circuit Current (Isc): 6.24A
Optimum Operating Voltage (Vmp): 17.9V
Optimum Operating Current (Imp): 5.72A
Weight: 16.5lbs
Dimensions: 42.2 X 19.6 X 1.38 inches

Renogy Wanderer Li - 30Amp PWM Negative Ground Charge Controller:

Nominal Voltage: 12 VDC
Rated Charge Current: 30A
Max. PV Input Voltage: 25 VDC
Max. PV Input Power: 400W (12V)

Renogy 8Ft 10AWG Tray Cables (Pair):

Length: 8ft
AWG: 10
Rating Voltage: 600V/1000V
Temperature: -40°F to +185°F

Renogy 20Ft 10AWG MC4 Adaptor Kit (pair):

Length: 20ft
AWG: 10
Rating Voltage: 600/1000V
Temperature: -40°F to +185°F

Renogy MC4 Branch Connectors:

Withstanding Voltage: 1000V DC(TUV), 600V(UL)
Protection Degree: IP67, mated
Wiring Size Range: 10, 12, 14 AWG
Temperature: -40°F to +194°F

Mounting Z Brackets (set):

8X Long Cap Bolts
4X Short Bolts
4X Spring Washers and Four Washers
4X Z Shape Solar Panel Brackets
4X Nuts

Warranty Information:

Panels:

25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate
5-year material and workmanship warranty

Accessories:

1-year material warranty

Downloads:

Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit Specifications

Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit Warranty

Description

Looking for a reliable and efficient way to harness the power of the sun? Look no further than the Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit.

So why wait? Start harnessing the power of the sun today with the Renogy 400 Watt 12 Volt Monocrystalline Solar Starter Kit.