Looking for a Solar Kit that will run your small electronics while on the road? With the Renogy RV Kit, you can take the trip you wanted to the great outdoors while keeping all the comforts of your home at your fingertips. Unlike traditional gas generators, the Renogy 200 Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup.
The Renogy RV Kits are carefully designed to meet your RV needs. This kit includes two 100 Watt 12 Volt Monocrystalline Solar Panels, one Adventurer 30Amp PWM Charge Controller, one 30 foot 10 AWG MC4 Adaptor Kit, one 16 foot 10 AWG Tray Cable, one pair of branch connectors, a BT-1 Bluetooth Module, and one Cable Entry Housing.
The Adventurer 30A PWM Charge Controller was built and designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative-grounded for battery compatibility. It also features an LCD screen for displaying system operation information and data and allows for full control of parameter settings. The control is embedded with self-diagnostics and electronic protection functions that prevent damage from installation mistakes or system faults.
The Ronogy 200W RV Solar Kit also comes with a newly added BT-1 Bluetooth Module. This enables the user to pair the charge controller with Renogys smartphone app Renogy BT. The app allows you to view system performance in real time and make parameter changes right from your smartphone. Get your camper or RV powered up with your Renogy RV Kit today!
Features:
Efficient
- High solar cell efficiency : Monocrystalline 21%
- Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments
Reliable
- EL tested solar modules; no hot-spot heating guaranteed
- Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
- TPT back sheet ensures smooth performance over a long period of time
- IP65 rated junction box provides complete protection against environmental particles and low pressure water jets
Intuitive
- Sealed, Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid, efficient, and safe battery charging
- Remote monitoring and control via Bluetooth
Safe
- The Renogy Adventurer is equipped with multiple electronic protections: reverse current, overcharging, short-circuit and reversed polarity
- Pre-drilled holes on the back of the panel allow for fast and secure mounting
Expandable
- With the Renogy Adventurer 30A PWM Flush Mount Charge Controller, you can expand your system up to a maximum of 400W. The Renogy 100W Monocrystalline Expansion Kit is the perfect solution for future expansion
Included in your Kit:
- 2X 100 Watt Monocrystalline Solar Panels
- Renogy Adventurer 30 Amp PWM Charge Controller
- Renogy MC4 Branch Connectors
- Renogy 30 Foot 10 AWG MC4 Adaptor Kit
- Cable Entry Housing
- Renogy 16 foot 10 AWG Tray Cables
- 2X Mounting Z Brackets
- Renogy BT-1 Bluetooth Module
Specifications:
Renogy 100W Monocrystalline Solar Panel
- Maximum Power: 100W
- Maximum System Voltage:600V DC
- Open-Circuit Voltage (Voc): 21.6V
- Short-Circuit Current (Isc): 6.24A
- Optimum Operating Voltage (Vmp): 17.9V
- Optimum Operating Current (Imp): 5.72A
- Weight: 16.5lbs
- Dimensions: 42.2 X 19.6 X 1.38 inches
Renogy BT-1 Bluetooth Module
- Input Voltage: 5V-12V
- Communication Range: ≤15m
- Dimensions: 2.6 X 2.01 X 0.61 In
- Weight: 120 g (4.2oz)
Renogy Adventurer 30A PWM Negative-Ground Charge Controller
- Nominal Voltage: 12 VDC
- Rated Charge Current: 30A
- Max. PV Input Voltage: 25 VDC
- Max. PV Input Power: 400W (12V)
- Display: LED
Renogy Cable Entry Housing
- Material: UV-resistant ABS Plastic
- Weight (each component): 7.9 oz
- Recommended Adhesive: Sikaflex 252 or alike
- Dimensions (l x w x h): 4.7 x 3.9 x 2.0 in
- Cable Gland Diameter Range: 6mm – 12mm
Renogy 16Ft 10AWG Tray Cables (Pair)
- Length: 16ft
- AWG: 10
- Rating Voltage: 600V
- Temperature: -40°F to +185°F
Renogy MC4 Branch Connectors
- Withstanding Voltage: 1000V DC(TUV), 600V(UL)
- Protection Degree: IP67, mated
- Wiring Size Range: 10, 12, 14 AWG
- Temperature: -40°F to +194°F
Renogy 30Ft 10AWG MC4 Adaptor Kit (pair)
- Length: 30ft
- AWG: 10
- Rating Voltage: 600/1000V
- Temperature: -40°F to +185°F
Mounting Z Brackets (set)
- 8X Long Cap Bolts and 4X Short Bolts
- 4X Spring Washers and Four Washers
- 4X Z Shape Solar Panel Brackets
- 4X Nuts
Warranty Information:
- Panels: 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate, 5-year material and workmanship warranty.
- Accessories: 1-year material warranty
Downloads:
Description
Looking for a Solar Kit that will run your small electronics while on the road? With the Renogy RV Kit, you can take the trip you wanted to the great outdoors while keeping all the comforts of your home at your fingertips. Unlike traditional gas generators, the Renogy 200 Watt 12 Volt Solar RV Kit silently recharges your batteries so you can enjoy the great outdoors without the extra noise. Solar panels also allow you to run limited low watt electrical equipment without a power hookup.
The Renogy RV Kits are carefully designed to meet your RV needs. This kit includes two 100 Watt 12 Volt Monocrystalline Solar Panels, one Adventurer 30Amp PWM Charge Controller, one 30 foot 10 AWG MC4 Adaptor Kit, one 16 foot 10 AWG Tray Cable, one pair of branch connectors, a BT-1 Bluetooth Module, and one Cable Entry Housing.
The Adventurer 30A PWM Charge Controller was built and designed for RV applications as it allows for aesthetically clean flush mounting on walls and is negative-grounded for battery compatibility. It also features an LCD screen for displaying system operation information and data and allows for full control of parameter settings. The control is embedded with self-diagnostics and electronic protection functions that prevent damage from installation mistakes or system faults.
The Ronogy 200W RV Solar Kit also comes with a newly added BT-1 Bluetooth Module. This enables the user to pair the charge controller with Renogys smartphone app Renogy BT. The app allows you to view system performance in real time and make parameter changes right from your smartphone. Get your camper or RV powered up with your Renogy RV Kit today!
Features:
Efficient
- High solar cell efficiency : Monocrystalline 21%
- Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments
Reliable
- EL tested solar modules; no hot-spot heating guaranteed
- Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
- TPT back sheet ensures smooth performance over a long period of time
- IP65 rated junction box provides complete protection against environmental particles and low pressure water jets
Intuitive
- Sealed, Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid, efficient, and safe battery charging
- Remote monitoring and control via Bluetooth
Safe
- The Renogy Adventurer is equipped with multiple electronic protections: reverse current, overcharging, short-circuit and reversed polarity
- Pre-drilled holes on the back of the panel allow for fast and secure mounting
Expandable
- With the Renogy Adventurer 30A PWM Flush Mount Charge Controller, you can expand your system up to a maximum of 400W. The Renogy 100W Monocrystalline Expansion Kit is the perfect solution for future expansion
Included in your Kit:
- 2X 100 Watt Monocrystalline Solar Panels
- Renogy Adventurer 30 Amp PWM Charge Controller
- Renogy MC4 Branch Connectors
- Renogy 30 Foot 10 AWG MC4 Adaptor Kit
- Cable Entry Housing
- Renogy 16 foot 10 AWG Tray Cables
- 2X Mounting Z Brackets
- Renogy BT-1 Bluetooth Module
Specifications:
Renogy 100W Monocrystalline Solar Panel
- Maximum Power: 100W
- Maximum System Voltage:600V DC
- Open-Circuit Voltage (Voc): 21.6V
- Short-Circuit Current (Isc): 6.24A
- Optimum Operating Voltage (Vmp): 17.9V
- Optimum Operating Current (Imp): 5.72A
- Weight: 16.5lbs
- Dimensions: 42.2 X 19.6 X 1.38 inches
Renogy BT-1 Bluetooth Module
- Input Voltage: 5V-12V
- Communication Range: ≤15m
- Dimensions: 2.6 X 2.01 X 0.61 In
- Weight: 120 g (4.2oz)
Renogy Adventurer 30A PWM Negative-Ground Charge Controller
- Nominal Voltage: 12 VDC
- Rated Charge Current: 30A
- Max. PV Input Voltage: 25 VDC
- Max. PV Input Power: 400W (12V)
- Display: LED
Renogy Cable Entry Housing
- Material: UV-resistant ABS Plastic
- Weight (each component): 7.9 oz
- Recommended Adhesive: Sikaflex 252 or alike
- Dimensions (l x w x h): 4.7 x 3.9 x 2.0 in
- Cable Gland Diameter Range: 6mm – 12mm
Renogy 16Ft 10AWG Tray Cables (Pair)
- Length: 16ft
- AWG: 10
- Rating Voltage: 600V
- Temperature: -40°F to +185°F
Renogy MC4 Branch Connectors
- Withstanding Voltage: 1000V DC(TUV), 600V(UL)
- Protection Degree: IP67, mated
- Wiring Size Range: 10, 12, 14 AWG
- Temperature: -40°F to +194°F
Renogy 30Ft 10AWG MC4 Adaptor Kit (pair)
- Length: 30ft
- AWG: 10
- Rating Voltage: 600/1000V
- Temperature: -40°F to +185°F
Mounting Z Brackets (set)
- 8X Long Cap Bolts and 4X Short Bolts
- 4X Spring Washers and Four Washers
- 4X Z Shape Solar Panel Brackets
- 4X Nuts
Warranty Information:
- Panels: 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate, 5-year material and workmanship warranty.
- Accessories: 1-year material warranty
Downloads:
Reviews
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Air Handler & Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Air Handler & Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Choose Type of Gas
Air Handler & Installation Kit Size
Choose your Installation Kit Size Here
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Installation Kit Size
Questions & Answers
Have a Question?
-
If I want to use a solar system that will run a hair dryer let's say at 1600 watts. What type of battery and inverter do I need
Hi Clara,
If the hair drier is the only thing you are using the solar for, you would need an inverter that supports about 2000 Watts. If you plan on having other devices running from your solar kit as well, you would need to add the peak wattage to each appliance and choose an inverter that supports more wattage than the total sum. As for batteries you can use Sealed lead acid, AGM, or Lithium ion. Here is a link to our battery guide that can help you decide which type of battery you would want. https://tinyhouseessentials.com/collections/batteries.
Let me know if you have any other questions.